A clothes dryer is a wonderful convenience when it is working properly. A dryer with problems increases the workload and frustration of the person in charge of the household laundry. Loading up several baskets of wet clothes and driving to a laundermat is an inconvenience at the least. If this appliance does not produce enough heat to dry the clothes completely, takes too long, overheats or has a bad odor, a simple problem to check for may be an air flow obstruction.
Any restriction in the airflow to or from the dryer will cause problems in the drying cycle Lg dryer repair los angeles. The electric dryer is programmed to start drying when the drying cycle is selected, the door is shut and the button is pushed to start. If the lack of heat occurs in all cycles, the airflow is the first item to be checked. Extended drying time is also a sign of insufficient air.
Likewise, if a dryer overheats, the problem could be the same issue. The lint filter is checked and cleaned first; this may solve the problem. Lint filters should be cleaned often; many people do this at the end of each load so they do not forget. Hot, warm moist air that cannot dissipate will become stale and rancid creating an unpleasant odor. A buildup of lint in the dryer or dryer vent is a safety issue and a fire danger. This can start a fire which could spread to the whole house.
The first step in checking for a blockage is to check the amount of exhaust air at the outside vent while the dryer is operating. There should be a strong breeze indicating good airflow. If this flow is weak, the lint trap should be checked and cleaned. If this solves the issue, the dryer repairman or woman can take a bow and go back to work.
If the trap is clean, the next area to check is the vent hose which connects the dryer to the exterior vent. This hose will need to be removed and cleaned. This piece should be as straight as possible without any bends or kinks to provide easy flow. Once this unit is cleaned or verified to be clean, the vents on both ends need to be viewed, cleaned and assessed for problems.
If this does not solve the problem, more intensive repair efforts will need to be initiated. Due to the time and the research this would require, the problem should probably be turned over to a professional. These professionals have the experience and knowledge to diagnose and repair problems quickly.